Customized Mesh Steel Sheet Bending Machine
The warp-wire template is composed of a lifting mechanism, a V type template, a template trolley, etc. When the warp-wire falls on the V slot template of the warp-wire template and the wire is detected on the probe switch, the warp-wire template trolley runs step by step to the next drop position, the warp-wire falling device works and the wire falls to the V type template, so that the wire runs directly to the falling position of the template when the warp-wire template reaches the set root number. When the warp-wire template can drop, the warp-wire template lifting mechanism works and the mesh is placed on the V slot template supported by the warp-wire, And return to the origin of the meridian template, after reaching the origin, the meridian template uplift, waiting for the next mesh blanking.
| Item | Product type | Parameter | Remark |
| 1 | Max. welding capacity | ¢ 12+12mm | |
| 2 | Long wire diameter | ¢5-12mm | |
| 3 | Cross wire diameter | ¢5-12mm | |
| 4 | Long wire feeding method | In pre-cut | |
| 5 | Cross wire feeding method | In pre-cut | |
| 6 | Long wire spacing | ≥100mm | Mechanically adjustments |
| 7 | Cross wire spacing | ≥100mm | Programming adjustments |
| 8 | Length range of wire mesh | ≤3300mm | Adjustable |
| 9 | Width range of wire mesh | ≤1300mm | Adjustable |
| 10 | Number of welding spot | 34PCS | |
| 11 | Working speed max. | 40-60times/min | |
1 When the warp wire is placed on the template, the warp wire trolley can return to the wire placement direction,
2 the warp wire servo trolley works the wire into the clamped guide pipe. When the wire reaches the final part of the wire piercing and the warp wire has been pushed together, the wire clamps the wire and runs through the wire trolley to the welding mesh direction.
3 When the wire can be welded, the wire is fed into the welding electrode for welding.
4 After welding the first wire, the warp wire is sent into the loosening clamping device, and back to the warp feed progress point, clamping the wire again.
5 When the welding cylinder is lifted, the warp feed progress is further carried out for the next welding.
Product Tags:
|
|
Customized Steel Sheet Mesh Bending Machine 12mm Images
|
